|本期目录/Table of Contents|

[1]刘可,赵宏,荣亮,等.正颌手术对成人骨性Ⅲ类颜面部不对称三维特征改变锥形束CT观察[J].医学研究与战创伤救治(原医学研究生学报),2018,20(06):580-585.[doi:10.3969/j.issn.1672-271X.2018.06.005]
 LIU Ke,ZHAO Hong,RONG Liang,et al.Observation with cone-beam computed tomography in orthognathic surgery to improve adult patients with skeletal class Ⅲ facial asymmetry[J].JOURNAL OF MEDICALRESEARCH —COMBAT TRAUMA CARE,2018,20(06):580-585.[doi:10.3969/j.issn.1672-271X.2018.06.005]
点击复制

正颌手术对成人骨性Ⅲ类颜面部不对称三维特征改变锥形束CT观察()

《医学研究与战创伤救治》(原医学研究生学报)[ISSN:1672-271X/CN:32-1713/R]

卷:
第20卷
期数:
2018年06期
页码:
580-585
栏目:
临床研究
出版日期:
2018-11-20

文章信息/Info

Title:
Observation with cone-beam computed tomography in orthognathic surgery to improve adult patients with skeletal class Ⅲ facial asymmetry
作者:
刘可赵宏荣亮孙伯阳赵春洋
作者单位:210002南京,南京军区南京总医院口腔科(刘可、荣亮、孙伯阳);215300昆山,昆山市禾丰口腔医院正畸科(赵宏);210002南京,南京医科大学附属口腔医院正畸科 (赵春洋)
Author(s):
LIU Ke1ZHAO Hong2RONG Liang1SUN Bo-yang1ZHAO Chun-yang3
(1.Department of Stomatology, Nanjing General Hospital of Nanjing Military Region, PLA,Nanjing 210002,Jiangsu,China;2.Department of Orthodontics,Stomatology Hospital of Hefeng,Kunshan 215300,Jiangsu,China;3.Department of Orthodontics,Institute of Stomatology, Nanjing Medical University, Nanjing 210002,Jiangsu,China)
关键词:
下颌偏斜骨性Ⅲ类错牙合正颌锥形束CT测量
Keywords:
mandibular deviationskeletal class Ⅲ malocclusionorthognathic surgerycone-beam computed tomography(CBCT)measurement
分类号:
R783.5
DOI:
10.3969/j.issn.1672-271X.2018.06.005
文献标志码:
A
摘要:
目的 通过锥形束CT(CBCT)研究成人骨性Ⅲ类错牙合伴下颌偏斜患者正颌手术前后颌面部的三维特征。方法 回顾性分析正畸成人骨性Ⅲ类错牙合伴下颌偏斜患者20例患者临床资料,作为颜面部不对称组,另选取同期成人骨性Ⅰ类无下颌偏斜患者20例为颜面部对称组,对不对称组采用正畸-正颌联合治疗的方法 ,在正畸治疗前和正颌手术后12个月后使用CBCT分别对2组患者进行三维扫描获得颅面部DICOM数据,采用Dolphin 11.2对颌骨进行三维重建,选择描述颌骨骨性结构特征的28个点进行描记,对上下颌骨共60个变量进行分析统计。结果 不对称组手术后,牙合平面的倾斜度、上颌骨下部宽度、下颌总长度及下颌支倾斜的对称性得到了明显的纠正,但与对称组比较,在术后上颌骨的上部及双侧髁突的位置仍存在明显不对称性。结论 正颌手术对成人骨性Ⅲ类错牙合患者颌面部硬组织对称性的改善主要是对牙合平面的倾斜度、上颌骨下部宽度及下颌体长度不协调的纠正,而上颌骨上部及髁突的不对称仍未有效改善。
Abstract:
Objective To study the three-dimensional characteristics of the maxillofacial before and after orthognathic surgery in patients with skeletal class Ⅲ malocclusion and mandibular deviation.Methods 20 patients with skeletal class Ⅲ malocclusion and mandibular deviation were selected as facial asymmetry group, and other 20 adult skeletal class I patients with no mandibular deviation were symmetry facial group. Facial asymmetry was treated with orthodontic-orthognathic therapy. CBCT was used to perform 3D scanning on patients to obtain DICOM data before orthognathic operation and twelve months after the orthognathic operation.Dolphin 11.2 was utilized to rebuild the jaws in 3D. 28 points concerning maxillofacial feature were chosen,60 variables of maxillofacial measurements were analyzed.Results In the asymmetry group, the inclination of occlusal plane, the width of lower maxilla, the total length of mandible, and the symmetry of mandibular branch were significantly corrected, but relative to the symmetry group, the upper of maxilla and the position of condyle still has obvious asymmetry after surgery.ConcluionThe improvement of symmetry ofmaxillofacial hard tissue in orthodontic treatment of adult skeletal class Ⅲ malocclusion is mainly due to the inconsistent correction of occlusal plane inclination, maxillary lower width, and the length of mandibular. The asymmetry of upper maxilla and condylar still has not been effectively improved, Accurate 3D measurement analysis before surgery is crucial for the determination of surgical protocol and the judgment of prognosis.

参考文献/References:

[1]Takeshita N, Ishida M, Watanabe H, et al. Improvement of asymmetric stomatognathic functions, unilateral crossbite, and facial esthetics in a patient with skeletal Class III malocclusion and mandibular asymmetry, treated with orthognathic surgery[J]. Am J Orthod Dentofacial Orthop, 2013,144(3):441-454.
[2]Kamata H, Higashihori N, Fukuoka H, et al. Comprehending the three-dimensional mandibular morphology of facial asymmetry patients with mandibular prognathism[J].Prog Orthod,2017,18(1): 43.
[3]刘玲, 邓梦旋, 袁小平. 正畸-正颌联合矫治严重骨性Ⅲ类错牙合畸形硬组织长期稳定性的系统评价[J].医学研究生学报,2015,28(5): 510-516.
[4]Uribe F, Janakiraman N, Shafer D, et al. Three-dimensional cone-beam computed tomography-based virtual treatment planning and fabrication of a surgical splint for asymmetric patients: surgery first approach[J]. Am J Orthod Dentofacial Orthop, 2013,144(5):748-758.
[5]Schwartz HC. Efficient surgical management of mandibular asymmetry[J]. J Oral Maxillofac Surg, 2011,69(3):645-654.
[6]Baek SH, Cho IS, Chang YI, et al. Skeletodental factors affecting chin point deviation in female patients with class III malocclusion and facial asymmetry: a three-dimensional analysis using computed tomography[J]. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 2007,104(5):628-639.
[7]Lee H, Bayome M, Kim SH, et al. Mandibular dimensions of subjects with asymmetric skeletal class III malocclusion and normal occlusion compared with cone-beam computed tomography[J]. Am J Orthod Dentofacial Orthop, 2012,142(2):179-185.
[8]You KH, Lee KJ, Lee SH, et al.Three-dimensional computed tomography analysis of mandibular morphology in patients with facial asymmetry and mandibular prognathism[J]. Am J Orthod Dentofacial Orthop, 2010,138(5):540.e1-8. doi: 10.1016/j.ajodo.2010.04.025.
[9]刘可, 谷妍, 赵春洋, 等. 成人骨性Ⅲ类颜面部不对称上颌骨三维特征的CBCT探究[J]. 口腔医学研究, 2013,29(09):814-817.
[10]张丽萍, 肖丹娜, 黄毅. 骨性Ⅲ类错(牙合)伴下颌偏斜正颌外科的术前术后正畸治疗[J]. 天津医科大学学报, 2007,13(1):4-6,9.
[11]周会喜, 薛国初, 缪耀强, 等. LeFortⅠ型截骨旋转颌平面矫治下颌前突伴偏斜畸形[J]. 广东医学, 2010,31(11):1407-1408.
[12]刘可, 王珊, 王林, 等. 成人骨性Ⅲ类错(牙合)伴下颌偏斜患者下颌骨三维对称性的CBCT观察分析[J]. 实用口腔医学杂志, 2014,30(3):352-356.
[13]刘俊, 于美清, 董福生, 等. 成人骨性Ⅲ类错(牙合)伴下颌偏斜髁突形态和位置的锥形束CT观察[J]. 中华口腔医学杂志, 2014,49(7):403-407.
[14]Yang HJ, Hwang SJ. Change in condylar position in posterior bending osteotomy minimizing condylar torque in BSSRO for facial asymmetry[J]. J Craniomaxillofac Surg, 2014,42(4):325-332.
[15]Hashimoto T, Kuroda S, EL, et al. Correlation between craniofacial and condylar path asymmetry[J]. J Oral Maxillofac Surg, 2008,66(10):2020-2027.
[16]Baek SH, Kim TK, Kim MJ.Is there any difference in the condylar position and angulation after asymmetric mandibular setback[J]? Oral Surg Oral Med Oral Pathol Oral Radiol Endod,2006,101 (2): 155-163.
[17]Nishimura A,Sakurada S,Iwase M,et al.Positional changes in the mandibular Condyle and amount of mouth opening after sagittal split ralnus osteotomy with rigid or nonrigid osteosynthesis[J].J Oral Maxillofac Surg,1997,55(7):672-676.
[18]Wang L, Tian D, Sun X, et al. The Precise Repositioning Instrument for Genioplasty and a Three-Dimensional Printing Technique for Treatment of Complex Facial Asymmetry. Aesthetic Plast Surg,2017,41(4): 919-929.
[19]Kim DS, Huh KH, Lee SS, et al. The relationship between the changes in three-dimensional facial morphology and mandibular movement after orthognathic surgery[J]. J Craniomaxillofac Surg, 2013,41(7):686-693.
[20]Suzuki-Okamura E, Higashihori N, Kawamoto T, et al. Three-dimensional analysis of hard and soft tissue changes in patients with facial asymmetry undergoing 2-jaw surgery[J]. Oral Surg Oral Med Oral Pathol Oral Radiol,2015,120(3): 299-306.

相似文献/References:

备注/Memo

备注/Memo:
基金项目:南京军区南京总医院院管课题(2015018)
更新日期/Last Update: 2018-11-20